Making your own bunting

 

 

What you need

Card
Pencil/tailors' chalk
Ruler
Scissors (for cutting card)
Pinking shears or scissors suitable for cutting fabric
Fabric
Pins
Needle and thread/sewing machine
2m ribbon or cotton tape (wider than 2cm to make it easiest)
Iron

Step one: Make a template

To make sure all the triangles are the same size, cut a template from card to draw around. I reckon long triangles are better than short stubby ones.

Step two: Draw the triangles

Draw around the template on to your fabric using a pencil or piece of tailors' chalk. Remember to rotate the template each time you draw another triangle so you can get as many pieces as you can from your fabric.

Step three: Cut out the pieces

Use pinking scissors to cut around the triangles - this gives them a zigzag edge and stops the fabric from fraying. If you don't fancy investing in any new tools, use normal scissors to cut out and:
a) Put up with the fraying (really, this isn't ideal).
b) Use felt - which doesn't fray - or strong upholstery material
c) Overlock around the edges with a sewing machine

Step four: Attach the triangles

Take a long piece of ribbon and fold it in half, lengthways, so it is just as long but half as wide. Iron to keep the fold in place (this makes the next bit easier). Pin the fabric triangles on to the ribbon at equal distances from each other.

Step four: Sewing up

With the triangles pinned in place, sew all the way along the ribbon, at least 1cm from the edge, making that sure when you stitch, the needle goes through the triangle and both sides of the ribbon. A sewing machine makes this easy, but if you don't have one, hand-sew using a backstitch.